Share:
🔌 Component Identification
Type: CP (motor run capacitor)
📊 Electrical Specifications
-
Capacitance: 6.0 µF ±5%
-
Rated Voltage: 450 VAC
-
Frequency: 50 / 60 Hz
-
Temperature Range: –25°C to +70°C
-
Certifications: CE, CQC
-
Terminals: 2-pin, non-polarized
⚙️ Typical Applications
-
Air-conditioner outdoor condenser fan (higher HP units)
-
Large indoor blower motors
-
Heavy-load single-phase AC motors
🔄 Big picture (all your capacitors so far)
| µF | Typical motor size |
|---|---|
| 1.5 – 2.0 | Small indoor fan |
| 2.5 – 3.5 | Medium fan / small outdoor |
| 4.0 | Outdoor fan (≈1.0–1.5 HP AC) |
| 6.0 | Large outdoor fan (≈2.0 HP and above) |
(Typical industry ranges — always follow motor label if available.)
⚠️ Very Important
-
6.0 µF can ONLY replace 6.0 µF
-
Never “upgrade” from 4.0 → 6.0 µF
-
Wrong value = overcurrent, noise, overheating, early motor failure
✅ Replacement Rule (simple & safe)
✔ Same µF
✔ Voltage ≥ 450 VAC
✔ Same type (motor run / film / CP / CBB)
You’re clearly sorting capacitors by fan motor size / AC HP 👌
If you want, I can:
-
Match these µF values to Daikin / Panasonic / Midea AC HP
-
Or help you choose which one to install if the old label is missing
Inquiry - CAPACITOR 6.0UF
